Step 1: Power ON the Heated Lash Styler and allow to heat up for 10 seconds, select desired temperature 65-75-85-95ºC by repeatedly pressing power button

Step 2: Coat lashes, root to tip, with mascara - we recommend 2 coats of Lash Star Full Control Mascara for longer lasting results.

Step 3: Rest the curler on the lash base so the lashes settle in the deep grooves, and sweep upwards for at least 10 seconds. Repeat for longer lasting lift and curl.

BATTERY
When charging, the battery symbol will flash on the screen. Once fully charged, the display screen will be solid and bright.

When the battery is low, the battery symbol will flash on the display 10 times and then shut down.

First check if the battery has enough power. When the power is fully charged, press on the on/off button to start the device. Button functions below:

1. First time to press the ‘on’ button to enter the first gear heating mode. This sets the temperature to 65ºC and the screen will display 65ºC.

2. Second time to press the ‘on’ button to enter the second gear heating mode. This sets the temperature to 75ºC and the screen will display 75ºC.

3. Third time to press the ‘on’ button to enter the second gear heating mode. This sets the temperature to 85ºC and the screen will display 85ºC.

4. Fourth time to press the ‘on’ button to enter the second gear heating mode. This sets the temperature to 95ºC and the screen will display 95ºC.

5. Fifth time to press the ‘on’ button the heated lash curler will turn off and the gears will recycle.

At any heating position, the heated lash curler will turn off after you press the power button for 2 seconds and when it powers on again, it will be the same gear again.

No matter what gear you are in, the screen ºC will light up when the preheating is finished.

The above set temperature value is the average temperature of the heating wire, the display temperature is within a +/- 0.1ºC.

Auto-shutdown after 5 minutes

Do not turn on the device when it is charging.